Designed by machininsts for machinists to overcome the most simple workshop problems: increase productivity and reduce costs. Lighter, stronger and more efficient than most workholding devices on the market, the 5th axis fixtures range has been developed to offer maximum clamping forces and maximum machining capabilities.
*Hard Jaws
*Compatible with DV510
*3 Pieces - Fixed, Moveable & Centre
*125mm dia. base plate
*Manufactured from 6061 aluminium
*Suitable for use with the D1151S workholding fixture
*125mm dia. base plate
*Manufactured from 6061 aluminium
*Suitable for use with the D221M fixture
*160mm dia. base plate
*Manufactured from 6061 aluminium
*Suitable for use with D1151S workholding fixture
*160mm dia. base plate
*Manufactured from 6061 aluminium
*Suitable for use with the D221 fixture
Aluminum – 20° angle. For use with 110° or more tilt.
Pyramids are compatible with 96mm RockLock top tooling. Top tooling can be mounted in vertical or horizontal orientation. Machine make and model required when ordering to ensure correct fitment. 3x RL96A-56 are included.
Aluminum – 30° angle. For use with 120° or more tilt.
Pyramids are compatible with 96mm RockLock top tooling. Top tooling can be mounted in vertical or horizontal orientation. Machine make and model required when ordering to ensure correct fitment. 3x RL96A-56 are included.
*Indexable dovetail cutter
*Produces a 45 degree angle
*5 flute
*25mm shank diameter
*Cutter includes a set of chip breaker inserts
Size: 126mm x 152mm x 74mm
Jaw Width: 126mm
Clamping Force: 20.0 kK @ 100 Nm
Max Torque: 75 Nm
Forward Clamping Range:
0 – 183.9mm
Reverse Clamping Range:
72.6mm – 254.8mm
Size: 75mm x 150mm x 56mm
Jaw Width: 75mm
Clamping Force: 13.5 kN @ 60 Nm
Max Torque: 60Nm
Forward Clamping Range:
0 – 92.8mm
Reverse Clamping Range:
38.5mm – 128.8mm
Size: 158mm x 126mm x 30mm
Material Construction:
Aluminum
Spacing: Specific to MAM72 and MX330
Repeatability +/- 0.0003″
Size: 150mm x 158mm x 34.5mm
Material Construction:
Aluminum- (RL96A-DDR)
Spacing: Specific to DDR
Repeatability +/- 0.0003″
Size: 158mm x 126mm x 30mm
Material Construction:
Steel
Spacing: Specific to MAM72 and MX330
Repeatability +/- 0.0003″
Size: 125mm x 125.73mm x 87.88mm
Vise: V75100X
Vise Overall Clamping Range: 0 – 76.3mm
Compatible Pull Studs: Includes 4x PS20F
Size: 125.73mm x 151.13mm x 87.88mm
Vice: 2x V75150X
Compatible Pull Studs: Includes 4x PS20F
Size: 125.73mm x 151.13mm x 87.88mm
Vise: V75150X
Vise Overall Clamping Range: 0 – 128.8mm
Compatible Pull Studs: Includes 4x PS20F
Size: 125mm x 125.73mm x 87.88mm
Vise: 2x V75100X
Compatible Pull Studs: Includes 4x PS20F
*25.4mm x 38.10mm
*Repeatability .0025μm
*Clamping force 1,270kg
*45 angle ensures 1 to 1 positive clamping force
*Low profile design for optimum performance and tool clearance
*Holds as little as 1.5mm of material to reduce costs and waste
* 50.8mm x 50.8mm
* Repeatability .0025μm
* Clamping force 1,859kg
* 45 angle ensures 1 to 1 positive clamping force
* Low profile design for optimum performance and tool clearance
*Holds as little as 1.5mm of material to reduce costs and waste